2023 Rocky Mountain Slayer Carbon 70 27.5 SM

Retail Price

$7,139.00

Information

2023 Rocky Mountain Slayer Carbon 70 27.5 SM

Smash every trail in total confidence. The Slayer was right there at the start of freeride movement, and that “heritage-of-send” lives on. Longer and slacker than ever, expect villainous levels of confidence when ripping big mountain trails or devouring the park. Rip, send, smash, repeat. Nothing’s in your way.

Features may include:

  • Big hits. Steep descents. Endless laps. Slay’em all.

Smash every trail in total confidence. The Slayer was right there at the start of freeride movement, and that “heritage-of-send” lives on. Longer and slacker than ever, expect villainous levels of confidence when ripping big mountain trails or devouring the park. Rip, send, smash, repeat. Nothing’s in your way.

  • Poised to rip demanding terrain

Aggressive geometry coupled with our RIDE-4 adjustability makes short work of any and every trail. Rip and tear everything from Rampage lines to Whistler’s famous A-line—the Slayer cannot be stopped.

  • Villainous levels of traction and control

The Slayer’s is engineered around large volume air shocks and coil shocks. The result is a rate curve with a buttery, supple initial feel. Then, expect monstrously-competent levels of increasing support throughout travel.

  • Built to slay indefinitely

The Slayer is built to annihilate park laps over, and over, and over again. Equip it with a large single crown or dual crown forks—your weapon, your choice. It’s burly, versatile, and engineered to survive anything you throw at it.

Photos

Highlights

  • Yellowhead County, Alberta
  • 2023
  • Rocky Mountain
  • Slayer Carbon 70 27.5 SM
  • Available
  • Standover: 806 mm

Specifications

  • 2023
  • Rocky Mountain
  • Slayer Carbon 70
  • 27.5 SM
  • Mountain
  • Wheel Size: 27.5" | Top Tube Horizontal: 570 mm | Head Tube Angle: 63.9° | Seat Tube Angle: 75.4° | Rear Centre: 431 mm | Bottom Bracket Drop: 18 mm | Reach: 419 mm | Stack: 595 mm
  • Head tube: 90 mm | Seat Tube: 380 mm
  • Standover: 806 mm
  • 1180 mm
  • Rear Derailleur: Shimano XT | Bottom Bracket: FSA BB92 24mm
  • Shimano XT
  • Chainring: Shimano XT | 32T | 24mm Spindle | 170mm Crank Length
  • Cassette: Shimano XT 10-51T
  • Shimano M8100
  • SMOOTHWALL™ Carbon. Full Sealed Cartridge Bearings. Press Fit BB. Internal Cable Routing. 2-Bolt ISCG05 Tabs. RIDE-4™ Adjustable Geometry. 29: 170mm Travel / 27.5: 180mm Travel. FORM™ Alloy Rear Triangle
  • Fox 38 Float EVOL GRIP2 Performance Elite Series | 180mm, 37mm Offset
  • Rocky Mountain AM | 780mm Width | 38mm Rise | 9° Backsweep | 5° Upsweep | 35 Clamp
  • ODI Elite Pro Lock On
  • 180 mm
  • Fox DHX2 Performance | Steel Spring | Sealed Bearing Eyelet | 25x8mm F Hardware | All Sizes = 230x65mm | Size-Specific tune in FAQ
  • 180 mm
  • Shimano XT Trail 4 Piston | Metal Pads
  • Shimano XT
  • Shimano XT
  • Spokes: DT Swiss Champion 2.0 | Rims: Race Face AR 30 | 32H | Tubeless Ready - Tape | Valves Incl
  • Front: Rocky Mountain Sealed Boost 15mm | Rear: Race Face Trace Boost 148mm | 10° Engagement
  • Maxxis Assegai 2.5 WT 3C MaxxGrip DD Tubeless Ready
  • Maxxis Minion DHR II 2.4 WT 3C MaxxTerra DD Tubeless Ready
  • Headset: FSA Orbit NO.57E | Sealed Stainless 36°x45° Bearings | 30.2mm x 41mm x 7.1mm Upper | 40mm x 51.8mm x 7.5mm Lower | 1.5" Crown Race | Stem: Rocky Mountain 35 AM | 5° Rise | All Sizes = 40m | Saddle: WTB Volt Race 142
  • Seatpost: Race Face Turbine R (by Fox) Dropper 30.9mm | 125mm